How do I access my DSL router settings?

How do I access my DSL router settings?

Open a web browser and type the router’s IP address which would be either or in the address bar and press Enter. You are prompted to log into the router. The default username is admin and the default password is password. The username and password are case-sensitive.

How do I connect my Dlink router to NBN?

How to set up D-Link DSL-2878 for NBN FTTP or Wireless

1. Ensure your NBN Connection Box is turned on.
2. Plug an Ethernet cable from UNI-D1 port on your NBN Connection Box into the yellow LAN/WAN port on your D-Link router.
3. Plug in the power cable and turn your DSL-2878 on using the Power button on the side.

How can I configure my router without LAN cable?

As long as your computer can connect to Wi-Fi, you should be able to connect to the router and set it up.

1. Start by trying to connect to the Wi-Fi.
2. Connect to the router.
3. Once you’re connected, go to your browser (I recommend Edge or Chrome.
4. Once you’re in, enter the admin username and password to log in.

How do I change my wireless router settings?

1. How to Change Your Wireless Router Settings.
2. Connect to your network wirelessly, or via ethernet.
3. Find your router configuration page.
4. Log in with the username and password.
5. Find the Wireless Settings page.
6. Set the new channel, usually with a dropdown menu.
7. Your router will now reboot.
8. Troubleshooting.

How configure D-Link DSL G225?

Plug in the power cable and turn your DSL-G225 on using the Power button. Connect a device to your DSL-G225 via WiFi or Ethernet cable and go to in your browser. Log in with your D-Link username and password. On the home screen, select Setup Wizard.

What is D-Link Setup Wizard?

Wireless Network Setup Wizard This wizard is designed to assist you in your wireless network setup. It will guide you through step-by-step instructions on how to set up your wireless network and how to make it secure.