How do you read a rivet part number?

How do you read a rivet part number?

4 – First numbers after material code indicate diameter of rivet in 32nds of an inch. 4=4/32″ or 1/8″, 12=12/32″ or 3/8″, etc. 8 – Last numbers indicate length of rivet in 16ths of an inch: 8=8/16″ or 1/2″, 10=10/16″ or 5/8″, etc.

What is MS20470?

Page 1. SOLID RIVETS – Aluminum MS20470 and MS20426. Type A =1100 Soft , Low strength. Type AD=2117-t4 Medium Strength, 26,000 PSI*. Type B =5056-H32, for magnesium Alloys, 24,000PSI.

How do you identify an ad rivet?

Example: AN-470-AD-4-8 rivet

1. The first set of letters and numbers refers to the industry specification (military standard):
2. Next, there are three numbers specifying the rivet head style:
3. After the style code is a letter code identifying the material or alloy type:
4. The next number is the rivet diameter:

What are the parts of a rivet?

Pop rivets consist of two parts. The first part is called the rivet body (also known as the shell or hat) and the second part is called the mandrel (also known as the stem). In situations where access to both sides of a component is limited, a hole is first drilled through the parts to be joined.

How many rivets come in a pound?

Amazon.com: C.S. Osborne Copper Rivets #1700 Size 12, 1 Lb Box, Approx. 186 Count : Industrial & Scientific.

Which of these rivets are used for general repair work?

Rivet Strength The 2117-T rivet is used for general repair work, since it requires no heat treatment, is fairly soft and strong, and is highly corrosion resistant when used with most types of alloys. Always consult the maintenance manual for correct rivet type and material.

Which rivet is considered a universal head rivet?

The universal head rivet is a combination of the roundhead, flathead, and brazier head. It is used in aircraft construction and repair in both interior and exterior locations. When replacement is necessary for protruding head rivets—roundhead, flathead, or brazier head—they can be replaced by universal head rivets.

What are the different rivet Alloys & Codes?

Rivet Head Markings

• No mark (alloy code A): 1100 or 3003 pure aluminum.
• Dimple (alloy code AD): 2117 aluminum alloy.
• Raised dot (allow code D): 2017 aluminum alloy.
• Raised double dash (alloy code DD): 2024 aluminum alloy.
• Raised cross (alloy code B): 5056 aluminum alloy.
• Raised circle (alloy code E): 7050 aluminum alloy.

How do you read rivets?

The first number in the trade size refers to the diameter of the rivet in 32nds of an inch. The second number(s) refers to the maximum grip length in 16ths of an inch. So, a trade size 45 rivet dimensions are 4/32” (1/8”) diameter with a 5/16” maximum grip range.