What size is a 17 socket?
SAE to Metric Conversion Chart
| SAE Size | Metric Size | Inches Decimal |
|---|---|---|
| 21/32″ | 0.656 | |
| 17mm | 0.669 | |
| 11/16″ | 0.688 | |
| 18mm | 0.709 |
Is there a 17mm socket?
1/2-in Drive 17mm Metric Shallow Impact Socket is engineered and constructed to endure high torque application with impact wrenches. This impact socket is specially designed to engage with the flats of fasteners to prevent rounding so it’s time to turn up the torque and turn tough jobs into easy ones.
What are the sizes of sockets?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).
Is there a 5.5 mm socket?
Capri Tools 5.5 mm Shallow Socket, 1/4 in. Drive, 12-point, Metric.
What size socket is 17 mm?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 16mm | 0.63 | |
| 21/32″ | 0.656 | |
| 17mm | 0.669 | |
| 11/16″ | 0.688 |
What is a 17 mm in standard size?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 15mm | Just short of 5/8 Inch | 0.59055 Inches |
| 16mm | 5/8 Inch | 0.62992 Inches |
| 17mm | Just short of 11/16 Inch | 0.66929 Inches |
| 18mm | Just short of 3/4 Inch | 0.70866 Inches |
What is a 17 mm socket in inches?
What size is a half inch socket in metric?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ | |
| 5/8″ | 24mm | 15/16″ |
What size socket is between 1/4 and 5 16?
Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)
How do I know what size socket I have?
How to Determine the Right Size Socket for a Nut
- Turn on the digital caliper and set it to read in inches, not millimeters.
- Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
- Check the caliper display.
- Turn on the digital caliper and set it to read in millimeters, not inches.
What is a 5.5 mm socket for?
The CRAFTSMAN Metric 1/4-in Drive 5.5mm 6-Point Socket is a dependable tool designed for releasing touch-to-reach bolts and nuts. Paired with your trusty socket wrench or driver, this socket will engage even a hardened or rusty fastener. This piece is designed for 5.5mm metric fasteners and any 1/4-in driver.
What is 5.5 mm used for?
5.5 mm to 1 foot scale (1:55.4 or 1:55) is used for modelling narrow gauge railways. 12 mm (0.472 in) gauge track is used to represent 2 ft (610 mm) to 2 ft 3 in (686 mm) gauge prototypes. 16.5 mm (0.65 in) gauge track is used to represent 3 ft (914 mm) gauge prototypes.
